How To Move Nordictrack Treadmill 1750
Moving a NordicTrack 1750 treadmill requires careful planning and execution due to its size and weight. Following a systematic approach can ensure a safe and efficient relocation process.
Preparation
Prior to commencing the move, gather the necessary tools and materials. These may include:
- Adjustable wrench
- Screwdriver set (Phillips head and flathead)
- Moving blankets or furniture pads
- Moving straps or rope
- Hand truck or dolly (capable of supporting the treadmill's weight)
- Gloves for improved grip
- Tape (packing or duct tape)
- Bubble wrap (optional, for additional protection)
Ensure adequate clearance in both the origin and destination locations. Measure doorways, hallways, and stairwells to confirm the treadmill can pass through. Clear any obstacles from the path, such as furniture, rugs, or electrical cords.
Disassembly
The NordicTrack 1750 treadmill can be partially disassembled to reduce its size and weight. This typically involves removing the console and folding the running deck.
Console Removal
Turn off and unplug the treadmill from the power outlet. This is a crucial safety precaution to prevent electrical shock.
Locate the screws securing the console to the upright supports. These are generally found on the back or sides of the console. Use the appropriate screwdriver (Phillips head) to remove these screws. Place the screws in a resealable bag and label it clearly (e.g., "Console Screws") to avoid confusion during reassembly.
Carefully detach the console from the uprights. Be mindful of any wires connecting the console to the base. Disconnect these wires by gently pulling apart the connectors. Avoid pulling on the wires themselves, as this could damage them. Label each wire connector with tape to ensure correct reconnection later.
Wrap the console in bubble wrap or a moving blanket to protect it from scratches and impacts during transport. Secure the wrapping with tape.
Running Deck Folding
The NordicTrack 1750 features an EasyLift Assist mechanism that facilitates folding the running deck. Locate the latch or knob that releases the folding mechanism. This is usually found near the base of the treadmill, where the running deck connects to the upright supports.
Release the latch or knob and carefully lift the running deck until it locks into the upright position. Ensure the deck is securely locked before proceeding. A clicking sound often indicates that the mechanism is engaged correctly.
Securing the Treadmill
Once the treadmill is folded, secure the frame to prevent it from unfolding during transport. Use moving straps or rope to tightly bind the upright supports to the folded running deck. Wrap the straps around the treadmill several times and secure them with a knot or buckle. Ensure the straps are tight enough to prevent movement but not so tight that they damage the treadmill's frame.
Protect the treadmill's frame and other vulnerable components by wrapping them in moving blankets or furniture pads. Pay particular attention to the corners and edges, as these are most susceptible to damage. Secure the blankets with tape.
Moving the Treadmill
Use a hand truck or dolly to move the treadmill. Position the hand truck or dolly beneath the folded treadmill, ensuring the weight is evenly distributed. Tilt the treadmill back slightly and carefully roll it to the desired location.
When navigating stairs, exercise extreme caution. Enlist the help of at least one additional person. One person should guide the treadmill from the top of the stairs, while the other person controls the descent from below. Move slowly and deliberately, taking frequent breaks to avoid fatigue.
During transport, secure the treadmill in the moving vehicle. Use moving straps or rope to tie the treadmill to the vehicle's walls or floor. This will prevent it from shifting or tipping over during transit. Place additional moving blankets around the treadmill to provide cushioning and prevent scratches.
Reassembly
Upon arrival at the destination, carefully unload the treadmill from the moving vehicle. Use the hand truck or dolly to move it to its final location.
Unfolding the Running Deck
Release the latch or knob that secures the running deck in the folded position. Carefully lower the running deck to the ground. Avoid dropping the deck, as this could damage the folding mechanism or other components.
Console Reattachment
Reconnect the wires between the console and the base, matching the labels you applied during disassembly. Ensure the connectors are securely plugged in.
Position the console on the upright supports and align the screw holes. Reinstall the screws you removed during disassembly. Tighten the screws securely, but avoid over-tightening, as this could damage the console or uprights.
Final Checks
After reassembling the treadmill, inspect all connections and components to ensure they are secure. Check the running belt for proper alignment and tension. Plug the treadmill into the power outlet and turn it on. Test all functions to ensure they are working correctly.
Consult the NordicTrack 1750 owner's manual for detailed instructions and troubleshooting tips. If you encounter any difficulties or are unsure about any aspect of the moving process, seek professional assistance from a qualified technician.
Note: This guide provides general instructions. Specific procedures may vary slightly depending on the model and configuration of your NordicTrack 1750 treadmill. Always refer to the owner's manual for the most accurate and up-to-date information.
Safety First: Always prioritize safety during the moving process. Wear appropriate protective gear, such as gloves and closed-toe shoes. Enlist the help of others when lifting or moving heavy objects. If you are unsure about any step, seek professional assistance.
By following these steps, you can safely and efficiently move your NordicTrack 1750 treadmill. Remember to take your time, exercise caution, and prioritize safety throughout the process.
